|
| ||||||||||||||||
|
| ||||||||||||||||
The password for TCP-MD5 authentication.
| BGPMain (EventLoop& eventloop)
| BGPMain |
| ~BGPMain ()
| ~BGPMain |
| ProcessStatus status (string& reason)
| status |
Get the process status
Reimplemented from ServiceBase.
| int startup ()
| startup |
Startup operation.
Returns: XORP_OK on success, otherwise XORP_ERROR.
Reimplemented from ServiceBase.
| int shutdown ()
| shutdown |
Shutdown operation.
Returns: XORP_OK on success, otherwise XORP_ERROR.
Reimplemented from ServiceBase.
| void component_up (const string& component_name)
| component_up |
A method that should be called when an internal subsystem comes up.
Parameters:
| component_name | the name of the component. |
| void component_down (const string& component_name)
| component_down |
A method that should be called when an internal subsystem goes down.
Parameters:
| component_name | the name of the component. |
| bool is_interface_enabled (const string& interface)
| is_interface_enabled |
[const]
Test whether an interface is enabled.
Parameters:
| interface | the name of the interface to test. |
Returns: true if it exists and is enabled, otherwise false.
| bool is_vif_enabled (const string& interface, const string& vif)
| is_vif_enabled |
[const]
Test whether an interface/vif is enabled.
Parameters:
| interface | the name of the interface to test. |
| vif | the name of the vif to test. |
Returns: true if it exists and is enabled, otherwise false.
| bool is_address_enabled (const string& interface, const string& vif,
const IPv4& address)
| is_address_enabled |
[const]
Test whether an IPv4 interface/vif/address is enabled.
Parameters:
| interface | the name of the interface to test. |
| vif | the name of the vif to test. |
| address | the address to test. |
Returns: true if it exists and is enabled, otherwise false.
| bool is_address_enabled (const string& interface, const string& vif,
const IPv6& address)
| is_address_enabled |
[const]
Test whether an IPv6 interface/vif/address is enabled.
Parameters:
| interface | the name of the interface to test. |
| vif | the name of the vif to test. |
| address | the address to test. |
Returns: true if it exists and is enabled, otherwise false.
| typedef XorpCallback2<void, const string&, bool>::RefPtr InterfaceStatusCb | InterfaceStatusCb |
| typedef XorpCallback3<void, const string&, const string&, bool>::RefPtr VifStatusCb | VifStatusCb |
| typedef XorpCallback5<void, const string&, const string&, const IPv4&, uint32_t, bool>::RefPtr AddressStatus4Cb | AddressStatus4Cb |
| typedef XorpCallback5<void, const string&, const string&, const IPv6&, uint32_t, bool>::RefPtr AddressStatus6Cb | AddressStatus6Cb |
| void register_interface_status (InterfaceStatusCb cb)
| register_interface_status |
Add a callback for tracking the interface status.
The callback will be invoked whenever the status of the interface is changed from disabled to enabled or vice-versa.
Parameters:
| cb | the callback to register. |
| void register_vif_status (VifStatusCb cb)
| register_vif_status |
Add a callback for tracking the interface/vif status.
The callback will be invoked whenever the status of the interface/vif is changed from disabled to enabled or vice-versa.
Parameters:
| cb | the callback to register. |
| void register_address_status (AddressStatus4Cb cb)
| register_address_status |
Add a callback for tracking the IPv4 interface/vif/address status.
The callback will be invoked whenever the status of the tuple (interface, vif, address) is changed from disabled to enabled or vice-versa.
Parameters:
| cb | the callback to register. |
| void register_address_status (AddressStatus6Cb cb)
| register_address_status |
Add a callback for tracking the IPv6 interface/vif/address status.
The callback will be invoked whenever the status of the tuple (interface, vif, address) is changed from disabled to enabled or vice-versa.
Parameters:
| cb | the callback to register. |
| uint32_t get_prefix_length (const string& interface, const string& vif,
const IPv4& address)
| get_prefix_length |
Obtain the subnet prefix length for an IPv4 interface/vif/address.
Parameters:
| interface | the name of the interface. |
| vif | the name of the vif. |
| address | the address. |
Returns: the subnet prefix length for the address.
| uint32_t get_prefix_length (const string& interface, const string& vif,
const IPv6& address)
| get_prefix_length |
Obtain the subnet prefix length for an IPv6 interface/vif/address.
Parameters:
| interface | the name of the interface. |
| vif | the name of the vif. |
| address | the address. |
Returns: the subnet prefix length for the address.
| uint32_t get_mtu (const string& interface)
| get_mtu |
Obtain the MTU for an interface.
Parameters:
| the | name of the interface. |
Returns: the mtu for the interface.
| bool interface_address4 (const IPv4& address)
| interface_address4 |
[const]
Is the address one of this routers interface addresses?
| bool interface_address6 (const IPv6& address)
| interface_address6 |
[const]
Is the address one of this routers interface addresses?
| bool interface_address_prefix_len4 (const IPv4& address,
uint32_t& prefix_len)
| interface_address_prefix_len4 |
[const]
Obtain the prefix length for a particular IPv4 address.
Parameters:
| address | the address to search for. |
| prefix_len | the return-by-reference prefix length for address. |
Returns: true if the address belongs to this router, otherwise false.
| bool interface_address_prefix_len6 (const IPv6& address,
uint32_t& prefix_len)
| interface_address_prefix_len6 |
[const]
Obtain the prefix length for a particular IPv6 address.
Parameters:
| address | the address to search for. |
| prefix_len | the return-by-reference prefix length for address. |
Returns: true if the address belongs to this router, otherwise false.
| void local_config (const uint32_t& as, const IPv4& id,
bool use_4byte_asnums)
| local_config |
Set the local configuration.
Parameters:
| as | as number. |
| id | router id. |
| use_4byte_asnums | indicates we should send 4 byte AS numbers to all peers that are 4byte capable. |
| void set_confederation_identifier (const uint32_t& as, bool disable)
| set_confederation_identifier |
Set or disable the confederation identifier.
| void set_cluster_id (const IPv4& cluster_id, bool disable)
| set_cluster_id |
Set the cluster ID and enable or disable route reflection.
| void set_damping (uint32_t half_life,uint32_t max_suppress,uint32_t reuse,
uint32_t suppress, bool disable)
| set_damping |
Set the route flap damping parameters.
| void attach_peer (BGPPeer *p)
| attach_peer |
attach peer to peerlist
Parameters:
| p | BGP peer. |
| void detach_peer (BGPPeer *p)
| detach_peer |
detach peer from the peerlist.
Parameters:
| p | BGP peer. |
| void attach_deleted_peer (BGPPeer *p)
| attach_deleted_peer |
attach peer to deleted peerlist
Parameters:
| p | BGP peer. |
| void detach_deleted_peer (BGPPeer *p)
| detach_deleted_peer |
detach peer from the deleted peerlist.
Parameters:
| p | BGP peer. |
| BGPPeer * find_peer (const Iptuple& search, list<BGPPeer *>& peers)
| find_peer |
Find peer with this iptuple from the list provided
Parameters:
| search | iptuple. |
| peers | list to search. |
Returns: A pointer to a peer if one is found NULL otherwise.
| BGPPeer * find_peer (const Iptuple& search)
| find_peer |
Find peer with this iptuple
Parameters:
| search | iptuple. |
Returns: A pointer to a peer if one is found NULL otherwise.
| BGPPeer * find_deleted_peer (const Iptuple& search)
| find_deleted_peer |
Find peer with this iptuple on the deleted peer list.
Parameters:
| search | iptuple. |
Returns: A pointer to a peer if one is found NULL otherwise.
| bool create_peer (BGPPeerData *pd)
| create_peer |
create a new peer and attach it to the peerlist.
Parameters:
| pd | BGP peer data. |
Returns: true on success
| bool delete_peer (const Iptuple& iptuple)
| delete_peer |
delete peer tear down connection and remove for peerlist.
XrlBgpTarget xbt(bgp.get_router(), bgp);
Parameters:
| iptuple | iptuple. |
Returns: true on success
| bool enable_peer (const Iptuple& iptuple)
| enable_peer |
enable peer
Parameters:
| iptuple | iptuple. |
Returns: true on success
| bool disable_peer (const Iptuple& iptuple)
| disable_peer |
disable peer
Parameters:
| iptuple | iptuple. |
Returns: true on success
| bool bounce_peer (const Iptuple& iptuple)
| bounce_peer |
Drop this peering and if it was configured up allow it attempt a new peering.
Parameters:
| iptuple | iptuple. |
Returns: true on success
| void local_ip_changed (string local_address)
| local_ip_changed |
One of the local IP addresses of this router has changed. Where a change can be an addition or removal or a change in the link status. If the provided address matches any of the local ip addresses of any of the peerings unconditionally bounce the peering. Unconditional bouncing of the peering is all that is required if a link has gone down the old session will be dropped and the new one will fail. If the link has just come up then a session will be made.
| bool change_tuple (const Iptuple& iptuple, const Iptuple& nptuple)
| change_tuple |
Change one of the tuple settings of this peering.
Parameters:
| iptuple | original tuple. |
| iptuple | new tuple. |
Returns: true on success
| bool find_tuple_179 (string peer_addr, Iptuple& otuple)
| find_tuple_179 |
Find the tuple that has this peer address and both ports are 179. This is a hack as at the moment of writing the rtrmgr can't send both the old and new state of a variable.
Parameters:
| peer_addr | of tuple. |
| otuple | the tuple if one is found. |
Returns: true if a tuple is matched.
| bool change_local_ip (const Iptuple& iptuple, const string& local_ip)
| change_local_ip |
Change the local IP address of this peering.
Parameters:
| iptuple | iptuple. |
| local_ip | new value. |
Returns: true on success
| bool change_local_port (const Iptuple& iptuple, uint32_t local_port)
| change_local_port |
Change the local IP port of this peering.
Parameters:
| iptuple | iptuple. |
| local_port | new value. |
Returns: true on success
| bool change_peer_port (const Iptuple& iptuple, uint32_t peer_port)
| change_peer_port |
Change the peer IP port of this peering.
Parameters:
| iptuple | iptuple. |
| peer_port | new value. |
Returns: true on success
| bool set_peer_as (const Iptuple& iptuple, uint32_t peer_as)
| set_peer_as |
set peer as
Parameters:
| iptuple | iptuple. |
| peer_as | new value. |
Returns: true on success
| bool set_holdtime (const Iptuple& iptuple, uint32_t holdtime)
| set_holdtime |
set holdtime
Parameters:
| iptuple | iptuple. |
| holdtime | new value. |
Returns: true on success
| bool set_delay_open_time (const Iptuple& iptuple, uint32_t delay_open_time)
| set_delay_open_time |
set delay open time
Parameters:
| iptuple | iptuple. |
| delay_open_time | new value. |
Returns: true on success
| bool set_route_reflector_client (const Iptuple& iptuple, bool rr)
| set_route_reflector_client |
set route reflector client
Parameters:
| iptuple | iptuple. |
| rr | true if this peer is a route reflector client. |
Returns: true on success
| bool set_confederation_member (const Iptuple& iptuple, bool conf)
| set_confederation_member |
set route confederation member
Parameters:
| iptuple | iptuple. |
| conf | true if this peer is a confederation member. |
Returns: true on success
| bool set_prefix_limit (const Iptuple& iptuple,
uint32_t maximum, bool state)
| set_prefix_limit |
set prefix limit
Parameters:
| maximum | number of prefixes |
| state | true if the prefix limit is being enforced |
Returns: true on success
| bool set_nexthop4 (const Iptuple& iptuple, const IPv4& next_hop)
| set_nexthop4 |
set IPv4 next-hop.
Parameters:
| iptuple | iptuple. |
| next | -hop |
Returns: true on success
| bool set_nexthop6 (const Iptuple& iptuple, const IPv6& next_hop)
| set_nexthop6 |
set IPv6 next-hop.
Parameters:
| iptuple | iptuple. |
| next | -hop |
Returns: true on success
| bool get_nexthop6 (const Iptuple& iptuple, IPv6& next_hop)
| get_nexthop6 |
get IPv6 next-hop.
Parameters:
| iptuple | iptuple. |
| next | -hop |
Returns: true on success
| bool set_peer_state (const Iptuple& iptuple, bool state)
| set_peer_state |
Set peer state.
@ return true on success.
Parameters:
| iptuple | iptuple. |
| state | should the peering be enable or disabled. |
| bool activate (const Iptuple& iptuple)
| activate |
Activate peer.
Enable the peering based on the peer state.
@ return true on success.
Parameters:
| iptuple | iptuple. |
| bool activate_all_peers ()
| activate_all_peers |
Activate all peers.
Returns: true on success
| bool set_peer_md5_password (const Iptuple& iptuple, const string& password)
| set_peer_md5_password |
Set peer TCP-MD5 password.
Parameters:
| iptuple | iptuple. |
| password | The password to use for TCP-MD5 authentication; if this is the empty string, then authentication will be disabled. |
Returns: true on success.
| bool next_hop_rewrite_filter (const Iptuple& iptuple, const IPv4& next_hop)
| next_hop_rewrite_filter |
| bool get_peer_list_start (uint32_t& token)
| get_peer_list_start |
| bool get_peer_list_next (const uint32_t& token,
string& local_ip,
uint32_t& local_port,
string& peer_ip,
uint32_t& peer_port)
| get_peer_list_next |
| bool get_peer_id (const Iptuple& iptuple, IPv4& peer_id)
| get_peer_id |
| bool get_peer_status (const Iptuple& iptuple, uint32_t& peer_state,
uint32_t& admin_status)
| get_peer_status |
| bool get_peer_negotiated_version (const Iptuple& iptuple,
int32_t& neg_version)
| get_peer_negotiated_version |
| bool get_peer_as (const Iptuple& iptuple, uint32_t& peer_as)
| get_peer_as |
| bool get_peer_msg_stats (const Iptuple& iptuple,
uint32_t& in_updates,
uint32_t& out_updates,
uint32_t& in_msgs,
uint32_t& out_msgs,
uint16_t& last_error,
uint32_t& in_update_elapsed)
| get_peer_msg_stats |
| bool get_peer_established_stats (const Iptuple& iptuple,
uint32_t& transitions,
uint32_t& established_time)
| get_peer_established_stats |
| bool get_peer_timer_config (const Iptuple& iptuple,
uint32_t& retry_interval,
uint32_t& hold_time,
uint32_t& keep_alive,
uint32_t& hold_time_configured,
uint32_t& keep_alive_configured,
uint32_t& min_as_origination_interval,
uint32_t& min_route_adv_interval)
| get_peer_timer_config |
| bool register_ribname (const string& name)
| register_ribname |
| void main_loop ()
| main_loop |
| void terminate ()
| terminate |
| bool run ()
| run |
| XorpFd create_listener (const Iptuple& iptuple)
| create_listener |
| LocalData * get_local_data ()
| get_local_data |
| void start_server (const Iptuple& iptuple)
| start_server |
| void stop_server (const Iptuple& iptuple)
| stop_server |
| void stop_all_servers ()
| stop_all_servers |
Stop listening for incoming connections.
| bool originate_route (const IPv4Net& nlri,
const IPv4& next_hop,
const bool& unicast,
const bool& multicast,
const PolicyTags& policytags)
| originate_route |
Originate an IPv4 route
Parameters:
| nlri | subnet to announce |
| next_hop | to forward to |
| unicast | if true install in unicast routing table |
| multicast | if true install in multicast routing table |
| policytags | policy-tags associated with route. |
Returns: true on success
| bool originate_route (const IPv6Net& nlri,
const IPv6& next_hop,
const bool& unicast,
const bool& multicast,
const PolicyTags& policytags)
| originate_route |
Originate an IPv6 route
Parameters:
| nlri | subnet to announce |
| next_hop | to forward to |
| unicast | if true install in unicast routing table |
| multicast | if true install in multicast routing table |
| policytags | policy-tags associated with route. |
Returns: true on success
| bool withdraw_route (const IPv4Net& nlri,
const bool& unicast,
const bool& multicast)
| withdraw_route |
[const]
Withdraw an IPv4 route
Parameters:
| nlri | subnet to withdraw |
| unicast | if true withdraw from unicast routing table |
| multicast | if true withdraw from multicast routing table |
Returns: true on success
| bool withdraw_route (const IPv6Net& nlri,
const bool& unicast,
const bool& multicast)
| withdraw_route |
[const]
Withdraw an IPv6 route
Returns: true on success
| template <typename A>
bool get_route_list_start (uint32_t& token,
const IPNet<A>& prefix,
const bool& unicast,
const bool& multicast)
| get_route_list_start |
| template <typename A>
bool get_route_list_next (
const uint32_t& token,
IPv4& peer_id,
IPNet<A>& net,
uint32_t& origin,
vector<uint8_t>& aspath,
A& nexthop,
int32_t& med,
int32_t& localpref,
int32_t& atomic_agg,
vector<uint8_t>& aggregator,
int32_t& calc_localpref,
vector<uint8_t>& attr_unknown,
bool& best,
bool& unicast,
bool& multicast)
| get_route_list_next |
| bool rib_client_route_info_changed4 (
const IPv4& addr,
const uint32_t& prefix_len,
const IPv4& nexthop,
const uint32_t& metric)
| rib_client_route_info_changed4 |
| bool rib_client_route_info_changed6 (
const IPv6& addr,
const uint32_t& prefix_len,
const IPv6& nexthop,
const uint32_t& metric)
| rib_client_route_info_changed6 |
| bool rib_client_route_info_invalid4 (
const IPv4& addr,
const uint32_t& prefix_len)
| rib_client_route_info_invalid4 |
| bool rib_client_route_info_invalid6 (
const IPv6& addr,
const uint32_t& prefix_len)
| rib_client_route_info_invalid6 |
| bool set_parameter (
const Iptuple& iptuple,
const string& parameter,
const bool toggle)
| set_parameter |
set parameter
Typically called via XRL's to set which parameters we support per peer.
Parameters:
| iptuple | iptuple |
| toggle | enable or disable parameter |
| BGPPlumbing * plumbing_unicast ()
| plumbing_unicast |
[const]
Originally inserted for testing. However, now used by all the "rib_client_route_info_*" methods.
| BGPPlumbing * plumbing_multicast ()
| plumbing_multicast |
[const]
| XrlStdRouter * get_router ()
| get_router |
| EventLoop& eventloop ()
| eventloop |
| XrlBgpTarget * get_xrl_target ()
| get_xrl_target |
| void notify_birth (const string& target_class,
const string& target_instance)
| notify_birth |
Call via XrlBgpTarget when the finder reports that a process has started.
Parameters:
| target_class | Class of process that has started. |
| target_instance | Instance name of process that has started. |
| void notify_death (const string& target_class,
const string& target_instance)
| notify_death |
Call via XrlBgpTarget when the finder reports that a process has terminated.
Parameters:
| target_class | Class of process that has terminated. |
| target_instance | Instance name of process that has terminated. |
| bool processes_ready ()
| processes_ready |
Returns: Return true when all the processes that BGP is dependent on are ready.
| string bgp_mib_name ()
| bgp_mib_name |
[const]
Returns: Return the bgp mib name.
| bool do_snmp_trap ()
| do_snmp_trap |
[const]
Check to see if the bgp snmp entity is running.
| void finder_death (const char *file, const int lineno)
| finder_death |
To be called when the finder dies.
| void configure_filter (const uint32_t& filter, const string& conf)
| configure_filter |
Configure a policy filter
Parameters:
| filter | Id of filter to configure. |
| conf | Configuration of filter. |
| void reset_filter (const uint32_t& filter)
| reset_filter |
Reset a policy filter.
Parameters:
| filter | Id of filter to reset. |
| void push_routes ()
| push_routes |
Push routes through policy filters for re-filtering.
| Profile& profile ()
| profile |
Returns: a reference to the profiler.
