ntp-genkeys - generate public and private keys

Alice holds the key.

Synopsis

Description

This program generates random keys used by either or both the NTPv3/NTPv4 symmetric key or the NTPv4 public key (Autokey) cryptographic authentication schemes. By default the program generates the ntp.keys file containing 16 random symmetric keys. In addition, if the rsaref20 package is configured for the software build, the program generates cryptographic values used by the Autokey scheme. These values are incorporated as a set of three files, ntpkey containing the RSA private key, ntpkey_host containing the RSA public key, where host is the DNS name of the generating machine, and ntpkey_dh containing the parameters for the Diffie-Hellman key-agreement algorithm. All files and are in printable ASCII format. A timestamp in NTP seconds is appended to each. Since the algorithms are seeded by the system clock, each run of this program produces a different file and file name.

The ntp.keys file contains 16 MD5 keys. Each key consists of 16 characters randomized over the ASCII 95-character printing subset. The file is read by the daemon at the location specified by the keys configuration file command and made visible only to root. An additional key consisting of a easily remembered password should be added by hand for use with the ntpq and ntpdc programs. The file must be distributed by secure means to other servers and clients sharing the same security compartment. While the key identifiers for MD5 and DES keys must be in the range 1-65534, inclusive, the ntp-genkeys program uses only the identifiers from 1 to 16. The key identifier for each association is specified as the key argument in the server or peer configuration file command.

The ntpkey file contains the RSA private key. It is read by the daemon at the location specified by the privatekey argument of the crypto configuration file command and made visible only to root. This file is useful only to the machine that generated it and never shared with any other daemon or application program.

The ntpkey_host file contains the RSA public key, where host is the DNS name of the host that generated it. The file is read by the daemon at the location specified by the publickey argument to the server or peer configuration file command. This file can be widely distributed and stored without using secure means, since the data are public values.

The ntp_dh file contains two Diffie-Hellman parameters: the prime modulus and the generator. The file is read by the daemon at the location specified by the dhparams argument of the crypto configuration file command. The file can be distributed by insecure means to other servers and clients sharing the same key agreement compartment, since the data are public values.

The file formats begin with two lines, the first containing the generating system DNS name and the second the datestamp. Lines beginning with # are considered comments and ignored by the daemon. In the ntp.keys file, the next 16 lines contain the MD5 keys in order. If necessary, this file can be further customized by an ordinary text editor. The format is described in the following section. In the ntpkey and ntpkey_host files, the next line contains the modulus length in bits followed by the key as a PEM encoded string. In the ntpkey_dh file, the next line contains the prime length in bytes followed by the prime as a PEM encoded string, and the next and final line contains the generator length in bytes followed by the generator as a PEM encoded string.

Note: See the file ./source/rsaref.h in the rsaref20 package for explanation of return values, if necessary.

Symmetric Key File Format

The key file uses the same comment conventions as the configuration file. Key entries use a fixed format of the form

keyno type key

where keyno is a positive integer, type is a single character which defines the key format, and key is the key itself.

The key may be given in one of three different formats, controlled by the type character. The three key types, and corresponding formats, are listed following.

S

The key is a 64-bit hexadecimal number in the format specified in the DES specification; that is, the high order seven bits of each octet are used to form the 56-bit key while the low order bit of each octet is given a value such that odd parity is maintained for the octet. Leading zeroes must be specified (i.e., the key must be exactly 16 hex digits long) and odd parity must be maintained. Hence a zero key, in standard format, would be given as 0101010101010101.

N

The key is a 64-bit hexadecimal number in the format specified in the NTP standard. This is the same as the DES format, except the bits in each octet have been rotated one bit right so that the parity bit is now the high order bit of the octet. Leading zeroes must be specified and odd parity must be maintained. A zero key in NTP format would be specified as 8080808080808080.

A

The key is a 1-to-8 character ASCII string. A key is formed from this by using the low order 7 bits of each ASCII character in the string, with zeroes added on the right when necessary to form a full width 56-bit key, in the same way that encryption keys are formed from Unix passwords.

M

The key is a 1-to-8 character ASCII string, using the MD5 authentication scheme. Note that both the keys and the authentication schemes (DES or MD5) must be identical between a set of peers sharing the same key number.

Note that the keys used by the ntpq and ntpdc programs are checked against passwords requested by the programs and entered by hand, so it is generally appropriate to specify these keys in ASCII format.

Files

Bugs