This manual is still in DRAFT state. Some sections are still empty, or almost. We keep merging material from other sources (essentially e-mail folders) while the proper integration of this material is delayed.
In this manual, we use he when speaking of the programmer or
maintainer, she when speaking of the translator, and they
when speaking of the installers or end users of the translated program.
This is only a convenience for clarifying the documentation. It is
absolutely not meant to imply that some roles are more appropriate
to males or females. Besides, as you might guess, GNU gettext
is meant to be useful for people using computers, whatever their sex,
race, religion or nationality!
This chapter explains the goals sought in the creation
of GNU gettext and the free Translation Project.
Then, it explains a few broad concepts around
Native Language Support, and positions message translation with regard
to other aspects of national and cultural variance, as they apply to
to programs. It also surveys those files used to convey the
translations. It explains how the various tools interact in the
initial generation of these files, and later, how the maintenance
cycle should usually operate.
Please send suggestions and corrections to:
Internet address:
[email protected]
Please include the manual's edition number and update date in your messages.
gettextUsually, programs are written and documented in English, and use English at execution time to interact with users. This is true not only of GNU software, but also of a great deal of commercial and free software. Using a common language is quite handy for communication between developers, maintainers and users from all countries. On the other hand, most people are less comfortable with English than with their own native language, and would prefer to use their mother tongue for day to day's work, as far as possible. Many would simply love to see their computer screen showing a lot less of English, and far more of their own language.
However, to many people, this dream might appear so far fetched that they may believe it is not even worth spending time thinking about it. They have no confidence at all that the dream might ever become true. Yet some have not lost hope, and have organized themselves. The Translation Project is a formalization of this hope into a workable structure, which has a good chance to get all of us nearer the achievement of a truly multi-lingual set of programs.
GNU gettext is an important step for the Translation Project,
as it is an asset on which we may build many other steps. This package
offers to programmers, translators and even users, a well integrated
set of tools and documentation. Specifically, the GNU gettext
utilities are a set of tools that provides a framework within which
other free packages may produce multi-lingual messages. These tools
include
GNU gettext is designed to minimize the impact of
internationalization on program sources, keeping this impact as small
and hardly noticeable as possible. Internationalization has better
chances of succeeding if it is very light weighted, or at least,
appear to be so, when looking at program sources.
The Translation Project also uses the GNU gettext distribution
as a vehicle for documenting its structure and methods. This goes
beyond the strict technicalities of documenting the GNU gettext
proper. By so doing, translators will find in a single place, as
far as possible, all they need to know for properly doing their
translating work. Also, this supplemental documentation might also
help programmers, and even curious users, in understanding how GNU
gettext is related to the remainder of the Translation
Project, and consequently, have a glimpse at the big picture.
Two long words appear all the time when we discuss support of native language in programs, and these words have a precise meaning, worth being explained here, once and for all in this document. The words are internationalization and localization. Many people, tired of writing these long words over and over again, took the habit of writing i18n and l10n instead, quoting the first and last letter of each word, and replacing the run of intermediate letters by a number merely telling how many such letters there are. But in this manual, in the sake of clarity, we will patiently write the names in full, each time...
By internationalization, one refers to the operation by which a
program, or a set of programs turned into a package, is made aware of and
able to support multiple languages. This is a generalization process,
by which the programs are untied from calling only English strings or
other English specific habits, and connected to generic ways of doing
the same, instead. Program developers may use various techniques to
internationalize their programs. Some of these have been standardized.
GNU gettext offers one of these standards. See section 10 The Programmer's View.
By localization, one means the operation by which, in a set of programs already internationalized, one gives the program all needed information so that it can adapt itself to handle its input and output in a fashion which is correct for some native language and cultural habits. This is a particularisation process, by which generic methods already implemented in an internationalized program are used in specific ways. The programming environment puts several functions to the programmers disposal which allow this runtime configuration. The formal description of specific set of cultural habits for some country, together with all associated translations targeted to the same native language, is called the locale for this language or country. Users achieve localization of programs by setting proper values to special environment variables, prior to executing those programs, identifying which locale should be used.
In fact, locale message support is only one component of the cultural data that makes up a particular locale. There are a whole host of routines and functions provided to aid programmers in developing internationalized software and which allow them to access the data stored in a particular locale. When someone presently refers to a particular locale, they are obviously referring to the data stored within that particular locale. Similarly, if a programmer is referring to "accessing the locale routines", they are referring to the complete suite of routines that access all of the locale's information.
One uses the expression Native Language Support, or merely NLS, for speaking of the overall activity or feature encompassing both internationalization and localization, allowing for multi-lingual interactions in a program. In a nutshell, one could say that internationalization is the operation by which further localizations are made possible.
Also, very roughly said, when it comes to multi-lingual messages, internationalization is usually taken care of by programmers, and localization is usually taken care of by translators.
For a totally multi-lingual distribution, there are many things to translate beyond output messages.
gettext offers a complete toolset for
translating messages output by C programs. Perl scripts and shell
scripts will also need to be translated. Even if there are today some hooks
by which this can be done, these hooks are not integrated as well as they
should be.
autoconf or bison, are able
to produce other programs (or scripts). Even if the generating
programs themselves are internationalized, the generated programs they
produce may need internationalization on their own, and this indirect
internationalization could be automated right from the generating
program. In fact, quite usually, generating and generated programs
could be internationalized independently, as the effort needed is
fairly orthogonal.
recode program is able to reconstruct at execution.
Since these descriptions are extracted from the RFC by mechanical means,
translating them properly would require a prior translation of the RFC
itself.
gcc to allow diacriticized characters in identifiers or use
translated keywords; `rm -i´ might accept something else than
`y´ or `n´ for replies, etc. Even if the program will
eventually make most of its output in the foreign languages, one has
to decide whether the input syntax, option values, etc., are to be
localized or not.
As we already stressed, translation is only one aspect of locales.
Other internationalization aspects are system services and are handled
in GNU libc. There
are many attributes that are needed to define a country's cultural
conventions. These attributes include beside the country's native
language, the formatting of the date and time, the representation of
numbers, the symbols for currency, etc. These local rules are
termed the country's locale. The locale represents the knowledge
needed to support the country's native attributes.
There are a few major areas which may vary between countries and
hence, define what a locale must describe. The following list helps
putting multi-lingual messages into the proper context of other tasks
related to locales. See the GNU libc manual for details.
12,345.67 English 12.345,67 German 12345,67 French 1,2345.67 AsiaSome programs could go further and use different unit systems, like English units or Metric units, or even take into account variants about how numbers are spelled in full.
gettext provides the means for developers and users to
easily change the language that the software uses to communicate to
the user.
Components of locale outside of message handling are standardized in
the ISO C standard and the SUSV2 specification. GNU libc
fully implements this, and most other modern systems provide a more
or less reasonable support for at least some of the missing components.
The letters PO in `.po´ files means Portable Object, to distinguish it from `.mo´ files, where MO stands for Machine Object. This paradigm, as well as the PO file format, is inspired by the NLS standard developed by Uniforum, and first implemented by Sun in their Solaris system.
PO files are meant to be read and edited by humans, and associate each
original, translatable string of a given package with its translation
in a particular target language. A single PO file is dedicated to
a single target language. If a package supports many languages,
there is one such PO file per language supported, and each package
has its own set of PO files. These PO files are best created by
the xgettext program, and later updated or refreshed through
the msgmerge program. Program xgettext extracts all
marked messages from a set of C files and initializes a PO file with
empty translations. Program msgmerge takes care of adjusting
PO files between releases of the corresponding sources, commenting
obsolete entries, initializing new ones, and updating all source
line references. Files ending with `.pot´ are kind of base
translation files found in distributions, in PO file format.
MO files are meant to be read by programs, and are binary in nature.
A few systems already offer tools for creating and handling MO files
as part of the Native Language Support coming with the system, but the
format of these MO files is often different from system to system,
and non-portable. The tools already provided with these systems don't
support all the features of GNU gettext. Therefore GNU
gettext uses its own format for MO files. Files ending with
`.gmo´ are really MO files, when it is known that these files use
the GNU format.
gettext
The following diagram summarizes the relation between the files
handled by GNU gettext and the tools acting on these files.
It is followed by somewhat detailed explanations, which you should
read while keeping an eye on the diagram. Having a clear understanding
of these interrelations will surely help programmers, translators
and maintainers.
Original C Sources ---> PO mode ---> Marked C Sources ---.
|
.---------<--- GNU gettext Library |
.--- make <---+ |
| `---------<--------------------+-----------'
| |
| .-----<--- PACKAGE.pot <--- xgettext <---' .---<--- PO Compendium
| | | ^
| | `---. |
| `---. +---> PO mode ---.
| +----> msgmerge ------> LANG.po ---->--------' |
| .---' |
| | |
| `-------------<---------------. |
| +--- New LANG.po <------------------'
| .--- LANG.gmo <--- msgfmt <---'
| |
| `---> install ---> /.../LANG/PACKAGE.mo ---.
| +---> "Hello world!"
`-------> install ---> /.../bin/PROGRAM -------'
The indication `PO mode´ appears in two places in this picture, and you may safely read it as merely meaning "hand editing", using any editor of your choice, really. However, for those of you being the lucky users of Emacs, PO mode has been specifically created for providing a cozy environment for editing or modifying PO files. While editing a PO file, PO mode allows for the easy browsing of auxiliary and compendium PO files, as well as for following references into the set of C program sources from which PO files have been derived. It has a few special features, among which are the interactive marking of program strings as translatable, and the validatation of PO files with easy repositioning to PO file lines showing errors.
As a programmer, the first step to bringing GNU gettext
into your package is identifying, right in the C sources, those strings
which are meant to be translatable, and those which are untranslatable.
This tedious job can be done a little more comfortably using emacs PO
mode, but you can use any means familiar to you for modifying your
C sources. Beside this some other simple, standard changes are needed to
properly initialize the translation library. See section 3 Preparing Program Sources, for
more information about all this.
For newly written software the strings of course can and should be
marked while writing it. The gettext approach makes this
very easy. Simply put the following lines at the beginning of each file
or in a central header file:
#define _(String) (String) #define N_(String) String #define textdomain(Domain) #define bindtextdomain(Package, Directory)
Doing this allows you to prepare the sources for internationalization.
Later when you feel ready for the step to use the gettext library
simply replace these definitions by the following:
#include <libintl.h> #define _(String) gettext (String) #define gettext_noop(String) String #define N_(String) gettext_noop (String)
and link against `libintl.a´ or `libintl.so´. Note that on
GNU systems, you don't need to link with libintl because the
gettext library functions are already contained in GNU libc.
That is all you have to change.
Once the C sources have been modified, the xgettext program
is used to find and extract all translatable strings, and create a
PO template file out of all these. This `package.pot´ file
contains all original program strings. It has sets of pointers to
exactly where in C sources each string is used. All translations
are set to empty. The letter t in `.pot´ marks this as
a Template PO file, not yet oriented towards any particular language.
See section 4.1 Invoking the xgettext Program, for more details about how one calls the
xgettext program. If you are really lazy, you might
be interested at working a lot more right away, and preparing the
whole distribution setup (see section 12 The Maintainer's View). By doing so, you
spare yourself typing the xgettext command, as make
should now generate the proper things automatically for you!
The first time through, there is no `lang.po´ yet, so the
msgmerge step may be skipped and replaced by a mere copy of
`package.pot´ to `lang.po´, where lang
represents the target language. See section 5 Creating a New PO File for details.
Then comes the initial translation of messages. Translation in itself is a whole matter, still exclusively meant for humans, and whose complexity far overwhelms the level of this manual. Nevertheless, a few hints are given in some other chapter of this manual (see section 11 The Translator's View). You will also find there indications about how to contact translating teams, or becoming part of them, for sharing your translating concerns with others who target the same native language.
While adding the translated messages into the `lang.po´ PO file, if you do not have Emacs handy, you are on your own for ensuring that your efforts fully respect the PO file format, and quoting conventions (see section 2.2 The Format of PO Files). This is surely not an impossible task, as this is the way many people have handled PO files already for Uniforum or Solaris. On the other hand, by using PO mode in Emacs, most details of PO file format are taken care of for you, but you have to acquire some familiarity with PO mode itself. Besides main PO mode commands (see section 2.3 Main PO mode Commands), you should know how to move between entries (see section 2.4 Entry Positioning), and how to handle untranslated entries (see section 6.4 Untranslated Entries).
If some common translations have already been saved into a compendium PO file, translators may use PO mode for initializing untranslated entries from the compendium, and also save selected translations into the compendium, updating it (see section 6.11 Using Translation Compendia). Compendium files are meant to be exchanged between members of a given translation team.
Programs, or packages of programs, are dynamic in nature: users write bug reports and suggestion for improvements, maintainers react by modifying programs in various ways. The fact that a package has already been internationalized should not make maintainers shy of adding new strings, or modifying strings already translated. They just do their job the best they can. For the Translation Project to work smoothly, it is important that maintainers do not carry translation concerns on their already loaded shoulders, and that translators be kept as free as possible of programming concerns.
The only concern maintainers should have is carefully marking new
strings as translatable, when they should be, and do not otherwise
worry about them being translated, as this will come in proper time.
Consequently, when programs and their strings are adjusted in various
ways by maintainers, and for matters usually unrelated to translation,
xgettext would construct `package.pot´ files which are
evolving over time, so the translations carried by `lang.po´
are slowly fading out of date.
It is important for translators (and even maintainers) to understand that package translation is a continuous process in the lifetime of a package, and not something which is done once and for all at the start. After an initial burst of translation activity for a given package, interventions are needed once in a while, because here and there, translated entries become obsolete, and new untranslated entries appear, needing translation.
The msgmerge program has the purpose of refreshing an already
existing `lang.po´ file, by comparing it with a newer
`package.pot´ template file, extracted by xgettext
out of recent C sources. The refreshing operation adjusts all
references to C source locations for strings, since these strings
move as programs are modified. Also, msgmerge comments out as
obsolete, in `lang.po´, those already translated entries
which are no longer used in the program sources (see section 6.5 Obsolete Entries). It finally discovers new strings and inserts them in
the resulting PO file as untranslated entries (see section 6.4 Untranslated Entries). See section 6.1 Invoking the msgmerge Program, for more information about what
msgmerge really does.
Whatever route or means taken, the goal is to obtain an updated `lang.po´ file offering translations for all strings.
The temporal mobility, or fluidity of PO files, is an integral part of the translation game, and should be well understood, and accepted. People resisting it will have a hard time participating in the Translation Project, or will give a hard time to other participants! In particular, maintainers should relax and include all available official PO files in their distributions, even if these have not recently been updated, without exerting pressure on the translator teams to get the job done. The pressure should rather come from the community of users speaking a particular language, and maintainers should consider themselves fairly relieved of any concern about the adequacy of translation files. On the other hand, translators should reasonably try updating the PO files they are responsible for, while the package is undergoing pretest, prior to an official distribution.
Once the PO file is complete and dependable, the msgfmt program
is used for turning the PO file into a machine-oriented format, which
may yield efficient retrieval of translations by the programs of the
package, whenever needed at runtime (see section 8.3 The Format of GNU MO Files). See section 8.1 Invoking the msgfmt Program, for more information about all modes of execution
for the msgfmt program.
Finally, the modified and marked C sources are compiled and linked
with the GNU gettext library, usually through the operation of
make, given a suitable `Makefile´ exists for the project,
and the resulting executable is installed somewhere users will find it.
The MO files themselves should also be properly installed. Given the
appropriate environment variables are set (see section 9.3 Magic for End Users), the
program should localize itself automatically, whenever it executes.
The remainder of this manual has the purpose of explaining in depth the various steps outlined above.
Go to the first, previous, next, last section, table of contents.